Quantcast
Jump to content
  • Signup for TowForce

    Sign in to get started and to receive Tower Down Notices.

ESC

Wanted: Vulcan 896/897 Tilt Cylinder

Recommended Posts

Posted (edited)

I am in need of a Vulcan 896/897 wheel lift tilt cylinder and pins.  Our cylinder is damaged and not able to be rebuilt.  I am in the market for new, or remanufactured.  Possibly open to used that I can have rebuilt locally.  My local Miller dealer is getting me prices now, but I know retail price.  Just hoping someone might have some old stock out there for a more affordable price.

Edited by ESC

Share this post


Link to post
Share on other sites

This is the cylinder that I am looking for.  Supposed to be part # 896670000

Inkedvulcan-896-897-2000-replacement-parts-underlift-assembly_LI.jpg

Share this post


Link to post
Share on other sites

I Thought I may have found one for you from a guy in town here that runs nothing but Vulcan equipment. But it turns out it is from an 894 Which if memory serves right is the 10 ton model. The 896/897's were 12 ton units. Another guy showed me the only one He has for the 896  and it is still on the unit, has been out in the weeds for years and the piston is very pitted and crusty. He still wants $500 for it... I told him he was out of his mind. I will keep a look out for you around here because almost everyone around here has Vulcan gear. I should be able to come up with one that can be rebuilt.  


There are Tow Truck Drivers, Then There is Towing and Recovery operators...... Which one are you??🤨

Share this post


Link to post
Share on other sites
I Thought I may have found one for you from a guy in town here that runs nothing but Vulcan equipment. But it turns out it is from an 894 Which if memory serves right is the 10 ton model. The 896/897's were 12 ton units. Another guy showed me the only one He has for the 896  and it is still on the unit, has been out in the weeds for years and the piston is very pitted and crusty. He still wants $500 for it... I told him he was out of his mind. I will keep a look out for you around here because almost everyone around here has Vulcan gear. I should be able to come up with one that can be rebuilt.  

Much appreciated. I ended up ordering one through a local dealer. $2100 with new pins shipped to me. It should be here this week. For such a little cylinder it sure carries a salty price tag. I appreciate the effort though.

And yes, the 896 is the 12 ton and uses the same piston as the 897.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
On 4/4/2020 at 8:43 PM, GRUMPS The Towman said:

Ok sorry I couldnt be of any help. For that price it better be gold plated... WOW

Ha, I thought exactly the same thing!   It is crazy overvalued, but the truck is a paperweight without it, so you know the deal.  We had to pull the trigger and get it coming.    Typically we have them rebuilt, but this one had some damage on the inside that our builder recommended not rebuilding this one.  I sort of figured 800-1000, but was really shocked when i found out it was over double that.  Our local dealer helped us out as much as they could on it, which I am grateful for.    I had hoped that someone here might have a new old stock one laying around or something, but what can you do.   Thanks for your effort!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...