dperone Posted October 17, 2019 Share Posted October 17, 2019 We were called by our local PD for a single vehicle crash. They left out a few key details such as the car was on it's side, on top of the guardrail, with a debris field approximately 1000 ft long. The car failed to negotiate the softest curve a road has ever seen and blasted 2 poles. After clipping both poles down to about 5 foot tall, it started flipping through the grass. I counted at least 4 complete rotations, one of which took down a rotten dead pine tree that was 3 foot around. After the 4th flip the front dug into the ground hard enough to leave a foot deep crater, which pretty much stopped the car dead in it's tracks (finally). Unfortunately, it was still on it's side and it failed to clear the guardrail by a measly 6 feet.    The field was saturated thanks to the 1.5 inches of rain that fell a few hours prior, so our access was limited to the road side of the rail. My first action was to roll it over as it wasn't too stable teetering on just the rail. I set it down as gently as I could because of course the gas tank was super close to the guardrail post. Luckily the car landed without hitting the tank and we moved to step 2, lifting and swinging the car off the rail.   It went smooth until it got to the return at the end, it kept snagging what was left of the exhaust. At this point we set the car back on the rail and carefully wiggled it off the rail. What I did was roll the car towards the driver's side with a high line just enough to clear the post and pulled the car to me with a low line. Think WreckMaster's 4/5 Cherokee hitch technique but using both winches instead of a rope.   Once it was clear of the rail I moved out and my dad backed the flatbed in to load. Because of the many missing pieces in the steering and suspension, I used my truck to "steer" the car up the bed.   After wiggling it up the bed and cleaning up the massive debris field, we took the car to the police department's secure lot. I once again had to scoot the car sideways on the bed to get it to come off straight, as it kept sliding sideways instead of down. The job went about as smooth as I expected it would with so much going against us and we cleared the scene in a little over 2 hours. 3 Quote Link to comment Share on other sites More sharing options...
mooresbp Posted October 21, 2019 Share Posted October 21, 2019 Looks like you got it done without much more damage. Not second guessing you, was thinking maybe pick it up before rolling it over and move away from the rail? Quote George - - Moore's BP We'll see you on down the road Link to comment Share on other sites More sharing options...
TowZone Posted October 21, 2019 Share Posted October 21, 2019 That's my only issue with the Renegade is the boom needs a little more reach. It always seems to be 6 inches to a foot too short. Â And keep those male part comments to yourself, I hear them every time I say the boom is a little too short. Â And Yes the unit could certainly handle the added length. How you get it is the mechanical engineers problem. Quote Link to comment Share on other sites More sharing options...
dperone Posted October 21, 2019 Author Share Posted October 21, 2019 6 hours ago, mooresbp said: Looks like you got it done without much more damage. Not second guessing you, was thinking maybe pick it up before rolling it over and move away from the rail? That was actually the first plan I had, to lift it while on it's side and spin it away from the rail. Unfortunately the car was only sticking past the guardrail 2 feet and it was a pretty good distance from the end of the rail. Even if I had more reach I don't think it would have helped me as the car didn't want to pivot due to the front being dug into the ground.  The other issue that made me decide to roll it first was how unstable it was. Resting on the guardrail on it's side, it was pretty wobbly. I didn't want to be stuck with the car in the air on it's side and not be able to control it if I had to set it down. Quote Link to comment Share on other sites More sharing options...
mooresbp Posted October 21, 2019 Share Posted October 21, 2019 I hear what you are saying and I know without being there it is a lot easier to come up with all kinds of plans. Like I said you got it done and that is what counts. Quote George - - Moore's BP We'll see you on down the road Link to comment Share on other sites More sharing options...
Orcas Tow Posted October 22, 2019 Share Posted October 22, 2019 Looks good, only thing better would have been a helicopter that would just hover above & pick it straight up. Every time I offer that service on scene the customer always declines... 1 Quote Hello from sunny (when its not raining) Orcas Island Link to comment Share on other sites More sharing options...
Moose Posted October 22, 2019 Share Posted October 22, 2019 Guy down the Street does it wrong for $$, I do it right for $$$ and if you want the ultimate that's either a Rotator or a *Helicopter $$$$$. Â *Depending on availability. Quote Link to comment Share on other sites More sharing options...
yoBdaBenO Posted October 23, 2019 Share Posted October 23, 2019 Hey, while we do our best not to cause secondary damage. I look at those this way "You cannot hurt it anymore that it already is as this point. Professionalism however keeps us thinking about these recoveries. We tell the drivers to take their time, have a plan and execute that plan. Nice Recovery, Thanks For Sharing. Quote Link to comment Share on other sites More sharing options...
GRUMPS The Towman Posted December 14, 2019 Share Posted December 14, 2019 They must have been HAULING A$$... Whats the speed limit there?? Nasty wreck. Nice job on the recovery. Looks like it went as well as it could have given the circumstances. Quote PROFESSIONAL TOWING & RECOVERY IS NOT JUST A JOB.. IT IS A LIFESTYLE Link to comment Share on other sites More sharing options...
Njsss Posted January 9, 2020 Share Posted January 9, 2020 Quality equipment & adept operator= no rotator  required 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.