kw6x6 Posted February 3, 2018 Share Posted February 3, 2018 I have a 480 im looking to install on a track machine. Does anyone know what direction the chain is supposed to spin on the input shaft. Thank you. Pics to follow Link to comment Share on other sites More sharing options...
kw6x6 Posted February 4, 2018 Author Share Posted February 4, 2018 also was looking for input speed. I will be using an auxiliary box behind transmission so i should have 5 winching speeds but, i dont want it to grind at idle when trying to engage winches. Thank you Link to comment Share on other sites More sharing options...
Sheridan Posted February 6, 2018 Share Posted February 6, 2018 A 480 Holmes is a great until to recover with. It doesn't matter on which direction the chain turns because you would just be changing the direction the control handles work. Link to comment Share on other sites More sharing options...
Reds Posted March 9, 2018 Share Posted March 9, 2018 75% of engine speed is what you want the pto. Like mentioned pto chain doesn't make a difference you can change the linkage up by the gear box so you can operate the handles either way you want, on the little wreckers they were usually forward was in backward was out but on the bigger units they went the other way since it's easier to pull and lean on the handles when winching for a long time. My 480 is set up like the big trucks I like it better but that is preference. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.