Quantcast
Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 03/14/2019 in all areas

  1. 5 points
    Ron ... you asked for a rant, or, a rah rah speech? Well ... here ya' go. No ... I'm not a state association, yet simply, a concerned individual who's worked much of my adult career training police officers and tow truck operators. For 30-plus years, I've been a career instructor and technical writer teaching white-line safety and the TIMs concept for tow operators. I have had my legs broken by an out-of-control vehicle while I worked a highway patrol recovery some 40-year's ago. I know what it's like to being critically injured at the hands of some motorhead because they were driving too fast for conditions in the rain. I know what it's like to think and rethink that incident asking, "What I could have done better to have lessened my on-scene exposure?" I felt guilty for having totaled my bosses tow truck, but, only because I was there to help serve law enforcement, not because it was my fault. It was at that very moment where I committed myself to learning and practicing on-scene safety. Since then, I have tracked highway related fatalities that go back as far as 1934, with nearly 950-operators killed for varying reasons; as many as 350-of those killed on the highways. I have written and reported on tow operator fatalities, helped bury many police officer and tow operator friends killed in the line-of-duty to the point I have grown weary of the repeated slaughter. But, I haven't lost my inner-fire with simple hopes that we'll somehow recognize a way to reduce the pandemic of tow operators killed. But, that comes with stirring the emotions of some tow operators and tow business owners who don't give a care about what their doing or how they're going about their daily tasks. We know that flares, signs, blockers, cops and whatever ... does take extra time, but the very fact of identifying a work-space that says, "HERE I AM", should be worth the time it takes. There are lessons to be learned here people ... we're not reinventing the wheel, but simply demand, "Do what you have to to make yourself seen; don't stand in active traffic lanes and stay OFF the white-line side." That's no-brainer stuff. How hard can that be? Sure there are incidents where distracted drivers will continue to crash into us working the highways. But, lessons learned from 350-tow operator fatalities has clearly identified that working on or near the white-line side is THE most dangerous place to be. Need I say more? I am a realist that understands that DUI's, texting and motoring stupidity are here to stay. Towers continue to put themselves in harms way. No ... not because of a lack of training, is it too much testosterone, or is it that overflowing macho that says, "Nothin's gonna' happen to me?" Without concern for hurting anyone's sensibilities, tower's ... stop worrying about the cops not being there, state associations not being involved, or those damned non-concerned highway drivers. You have NO control over what they do, but you have every bit of control about where you work and what you do to help save your individual life. It's your professional skills and on-scene processes that you that prayerfully will keep your name from being part of my fatality archives. Take control of your actions and stop worrying about what everyone else is doing. You should be telling yourself ... "Not me, not today", preparing yourself mentally that no punk driver is going to take you out based on your carelessness or complacency. On-scene safety is every operator's choice ... and NO amount of hand-holding or coddling by others will help keep you safe more than your own actions. In a nutshell, the cops aren't helping, the associations haven't stepped up and the motoring public simply doesn't give a crap. To me ... that presents a bleak picture of the industry's future. I will continue to help spread the word of safety and survival where I can. But, I can only pray for your safety. It's that, "lead them to water", kinda' thing. R
  2. 5 points
    Eric Fouquette

    Relax and Go Fishing

    Just to see what you can catch Source:
  3. 4 points
    We're never too far from an American flag, in fact the first picture here is our t shirt design but I had them add a bigger flag. We participate in both the Memorial Day and 4th of July parades each year with our flags flying high and proud. *Edited to add this year's 4th of July parade photo
  4. 4 points
    Randall, it's not the "we don't want to hurt anyone's feelings" attitude. It's the "it's never going to happen to me" attitude. If you can tell me what miracle it will take to wake these individuals in the industry up, then I will gladly help promote it. You do realize less the .5 percent of the industry can tell you how many tow operators have loss their lives roadside this year. I estimate that Less than 4% know there was a Tow Op killed this past Friday and as long as it doesn't effect them. They're Good...
  5. 4 points
    jrtowman

    Big changes in a year!

    Top picture was a year ago today and the bottom is what it looks like now.
  6. 3 points
    Orcas Tow

    Scooby Doo almost into house.

    I had a call for a Subaru into a house. I arrived on scene to find a Subaru had gone beyond the parking blocks & was resting on the house with the transmission pan on top of a large cinder block. Probably could have used the flatbed but thought it may drag trans pan across cinder block & create a mess, needed lift on both front wheels but that would take 2 wreckers. I'm a small operation on a remote island, so if possible I always try & use what I have on scene. Using my 2001 F550 4x4 with a Chevron 408, twin 9,000 winches with swaged 3/8 wire rope I found a Holmes Tree placed about perfectly on the passenger side of the car for my needs. Using a ladder I choked a 3/8"grade 80- recovery chain/4 ton snatchblock up high on the tree for a high/rearward pull on the passenger side of the Subaru with my drivers side wire rope terminating to a WreckMaster K strap to the passenger front wheel, rigged my passenger side line directly to the Subarus drivers front wheel again terminating with a WreckMaster K strap/4x4 wood block creating clearance for strap to body. Boom up/out high for lift, blocks behind wheels for safety I engaged winches & brought the car back up onto level ground without any further damage to the house or car. Replaced blocks & confirmed no undercarriage damage, happy customer.
  7. 3 points
    Orcas Tow

    Scooby Doo almost into house.

    Thank you for the kind words, as you know most times we are under some kind of push from Law Enforcement, customer, time/safety to clear or simply the next call pending so we get the job done. Every once in a while I get one that is not time sensitive, am able to document & share for the better of the industry as a whole as you can explain techniques all day long but pictures are worth a thousand words.
  8. 3 points
    Njsss

    F450

  9. 3 points
    EdsTowing

    Pics Say A Thousand Words...

    The Boys were out tonight on the Interstate to bring in a F550 with a Turbo issue. The message board is really worthwhile to keep people moved over if possible.
  10. 3 points
    Hi John ... it's always so very exciting to hear from you across the pond. I hope you and your business are doing well. Thanks for your comments and I personally won't apologize for offending other towers when it comes to ... as you've so eloquently described ... "self-preservation". Perhaps that's one of the reasons why this industry is behind the curve is because we don't want to hurt anyone's feelings. Will towers ever wake up? Highway related fatalities are traced back to 1934 and the same old pig headed mistakes and actions have resulted in literally hundreds of towers killed. And, Like me and you John, I'm pretty sure most towers have their own "struck-by" stories to tell ... some non-preventable. Like the over-use and abuse of amber-light on all the time, perhaps the current feeling is ... "Nah ... it's just another tower killed ... glad it's not me." I guess we've grown numb to the root causes that continue to get tower's killed, but I'm interested in the tower you talked with about no safety vest. At some point John, if you do talk with the company's owner, please share what his reaction were. Best regard. R.
  11. 3 points
    Randall.....that is the most sobering and accurate piece of text I have read in a long time ....you are bang on the money !!! I too in my career have been hit twice, my son Graham had his leg smashed, we had 2 other guys also injured on seperate occasions, both had life changing injuries, Additionally we lost long term employee Terry Booth ......Terry died at the side of a busy road in the middle of the night....witnesses at the inquest testified that his truck was properly positioned with cones out and lit up like a, quote ... "Christmas tree" he had a comprehensive training record with all the regular refreshers ... And STILL it happened !!! The woman driver that hit him was DUI and went to jail ....my point is ...on this occasion all the training he had did not save him .. I whole heartedly agree with your points about self preservation at the roadside ...... Just this morning, on my way to the supermarket , I saw a tow truck at the side of the road half on the kerb and half on the carriageway......apart from the beacons on there was no cones or warning signs displayed the operator had no reflective clothing on, just shorts and tee shirt and worst of all, he was working on the traffic side of the truck ....I stopped and parked my car behind him with the hazard warning lights on....as a bit of warning to other traffic .... I said to the driver, don't you have any hi vis clothing ? Yes he said, I forgot to bring it .. This Tow truck is owned and operated by a very good company and the owner is a long time friend and colleague, he is very pro active with safety and training...he will be furious and dissapointed when I advise him what I saw ...... .your point about macho, testosterone, it wont happen to me ??. Case in point !!! NEVER TAKE THE JOB FOR GRANTED .....NEVER DROP YOUR GUARD . The constant loss of life at the roadside is an absolute tragedy .....but if 1 life can be spared through increased reflectivity, hi visibility clothing, awareness training.... Then it is worthwhile .... Sorry if I have bored or offended any one but , self preservation is the key ...no matter what country or language it is in John.
  12. 3 points
    rreschran

    Tower Down 05.31.19 (CA)

    Right on Brian. But, forget about the costs. Cost shouldn't be a factor in safety and prevention. In all business plans, that should be the first consideration is how to keep a company's employees safe in the work-place. And, that's accomplished by safety, processes and training. We know it ... we see it ... we teach it. But, where is safety lost in translation when tower's can't retain even 10-percent? I'll go out on a limb here to suggest that on-scene safety is the responsibility of each tow company owner. It's each owner's responsibility to make sure towers have the, "mental tools and preparations", before sending their personnel onto the highway. I personally feel the industry has lost it's sense of safety by making bling and monster-tow trucks the priority while safety and survival scrapes the bottom of the proverbial barrel. I evidenced that recently by noting seven, only seven attendees, including you Brian, attend a PTSD seminar versus that of seeing literally hundreds of towers watching a rotator being run through its paces at the same tow show. It's evidenced in these posts where only a handful of personalities have the guts to approach those procedures and processes that get tower's killed. When an industry doesn't care about it's people, its current state will only get worse before it ever gets better. We know the issues, so, what's it take to overcome the lack of safety awareness in a proactive manner? One can't expect to peer down the barrel of a gun with the possibility of being shot in the face right?
  13. 3 points
    We had to rescue this lady the other day who decided a soaking wet farm field was the best place to turn around. Not 500 feet further down the road is an intersection with a nice hard packed dirt spot to turn around, but I guess she couldn't wait that long. Nice easy pull back to solid ground.
  14. 3 points
    EdsTowing

    Rollover With Clean Up

    Explorer lost control in the rain on a sharp "S" curve & rolled into the woods.... Lots of glass & debris to clean up... Now the fun starts...Property Damage Liability Claim....
  15. 3 points
    EdsTowing

    Early morning Roll....

    Eddie grabbed this one this morning.... Wrapped up in a few minutes...then a beauty shot...LoL
  16. 3 points
    EdsTowing

    Annnnd Another Rollover...

    Jeez 3 rollovers this weekend...all with clean ups too! This one tumble rolled in a private community w/ 25 mph speed limits... She said she swerved because a Goffer ran across the road... They cleaned up the roadway and told the Officer we would be back in the daylight to do a proper clean up.... Destroyed a new Journey...Customer called me to ask if it was driveable? I asked weren't you in it & she said yes....No...No it's not driveable...
  17. 3 points
    As of recent, i think both of us thought the days where over, but here we are. Nothing has been more enjoyable than teaching with this guy, Jeff Martin We at times argue like brothers over class logistics and stuff, but you folks see the end result. Add the other folks and we have a great time. Nobody, I'd rather have by my side. Love ya brother
  18. 3 points
    EdsTowing

    Another Rollover...

    Customer trying to avoid a stopped car & ran off the road. It hit a stone wall & flipped over... A nice "quicky" in & out job...
  19. 3 points
    BigBlonde

    AT ShowPlace Las Vegas Roll Call

    Glenn and myself will be there
  20. 2 points
    goodmichael

    Responder Training Program

    We lose people to roadside struck by incidents due to the industry not making safety their number one priority. Safety is an attitude. And safety costs money to perpetuate. We have a poor attitude on safety. We as an industry accept the sixty deaths as a cost of doing business for the year. We then cross our fingers that they will not happen to anyone we know. On the same front, people whine, cry, piss and moan about the cost of their insurance premiums. But nobody, but a select few, has ever raised the fact that if this industry adds protocols to make the industry safe at the cost of the end user, the premiums people pay will be considerably lower, and the sixty deaths might possible be cut to fifteen for the year. We have some outstanding business people in this industry that strive to provide a great, safe workplace for their people. We have a great deal of clueless people who have the assets and ability to acquire equipment but do not have the vision that safety is paramount in this field to survive for the long term. They are concerned, but not concerned enough to take the required steps to ensure a safe workplace. They are more concerned about the loss of business they will encounter if they charge accordingly, and their charges are reflective of a safe workplace. They do not want to hurt their customers feelings, and or are too worried about someone else getting sub par clientele. Then there are the meat grinder people, the bottom of the barrel companies. They could care less about their staff. Fire one hire one is their motto. You all are a piece of work. We also have poor industry leadership that is afraid to step up and call people out for lack of safety. I consider myself fairly informed despite not having a television in my home for four years. I read about fifty books a year on various subjects. Nobody from the manufacturing end , Miller, Jerr Dan, or any of the other CEO's of equipment manufacturers have called for any type of urgency in discussing this issue. Motor clubs have not done so either. Law enforcement has failed as well. I am speaking of at large discussions to address the issues of safety. I hope I made somebody mad. I really do. We as an industry perpetuate an unsafe working environment for our staff by not doing everything we can to ensure that we do all we can do. So to answer your question, so many die because so many more do not care enough to take affirmative action to prevent the deaths.
  21. 2 points
    ESC

    New driver in training- MDX vs fence

    We received a call from Upper Uwchlan Police Department at 10:28 AM to respond to Hickory Park on Park Road for one vehicle after an accident. We immediately dispatched one of our flatbed trucks to the scene. Upon arrival we found a vehicle that had run through a concrete and wood fence along the parking lot. We were able to winch the vehicle directly onto our flatbed. Cribbing was used to raise the front end of the vehicle to keep from causing any more damage to the undercarriage. The wood and concrete that was scattered throughout the area was picked up and loaded onto our flatbed truck. We called and requested a traffic cone and caution tape and additional laborer be sent to the scene. The broken concrete post was placed on our flatbed truck. All debris was picked up from the area. A traffic cone was placed over the hole that remained from the fence post. Caution tape was used to mark off the area of broken fence. The vehicle and debris was transported to our storage facility. No one was injured in the collision. The new driver was learning to drive with mom and practicing in the parking lot. Sent from my iPhone using Tapatalk
  22. 2 points
    Orcas Tow

    Bring the small truck he said.

    I got a call for a flatbed C30 in a ditch with roofing material in it, I said what's the weight, he said not much bring the small truck . Nick & I brought the 2001 F550 with a Chevron 408 & found a fully (over) loaded C60 with asphalt roofing backed in the ditch, guess they had difficulty getting it up the hill & backed into the ditch, lucky it didn't roll as it had a hard twist/lean. Guessing at 25,000lbs, good thing we have Holmes trees in the area, scotch blocks chained to rear D rings, drivers winch line low to the tree then a 3 part to the drivers side frame rail for a low pull, passenger side winch line 2 part high from the boom to the passenger side frame rail for an upward pull. Engaged the winches & she came right out.
  23. 2 points
    This was a call from the State Police for a pickup overturned down an embankment a few months back. The fire chief called and let me know that it was a Dodge Dually over a guard rail with a large amount of debris. It was a Sunday morning around 8 am. Since I happen to live just around the corner and didn't have a truck home that weekend I responded direct in my personal car. My dad went to the shop and got our 98 international 12 ton wrecker and we called in two of our other operators one in a 2011 Dodge 5500 mpl40 and our 2013 Hino flatbed. We worked with the fire company to cut the damaged section of guard rail and remove the debris that was scattered through the woods. We used our two wreckers and a few Holmes trees to move the truck back ward toward the open section of the guardrail and roll it back into its wheels in one motion. It was then pulled fully onto the roadway and loaded onto our Hino. The rest of the debris was piled into the back of the truck. The owner had us transport it direct to his farm not far away. The recovery bill was paid in full upon delivery. It took a bit of explaining for him to understand the fees involved in this recovery after his initial "sticker shock" when he saw the invoice. But in the end he understood and was happy. After we squared away I treated our crew to a good breakfast at a local deli.
  24. 2 points
    Orcas Tow

    Narrow Road Recovery

    This recovery is a few years old, I had time to actually take some pic's. We had a weeks worth of snow & high winds, this Suburban was a paramedics personal vehicle that he was using for aid calls as the ambulances were not able to get up many driveways. It rolled 4 times & ended up 75' off the narrow road, the worst injury was a broken arm of the 3 occupants. Thank god for all the trees around here, there always seems to be one in just the right place for an anchor or change of direction, fun stuff
  25. 2 points
    Hello everyone, My name is Rick, i'm the son of the driver that died in this horrible accident. I am happy to update this board with the following article: https://tucson.com/news/local/crime-and-courts/tucson-man-arrested-in-connection-with-hit-and-run-crash/article_3a13de0a-99c7-11e9-9ae7-77ecf65391ec.html WE CAUGHT HIM!! Thank you all for your prayers and support, it is amazing the communities that tradesmen/women create among themselves and their families. Sincerly, Rick Struble Jr.
  26. 2 points
    The past 2 Saturday's have started out with early morning calls to remove new unwanted lawn decorations. The first one was a young girl who ran a stop sign, jumped the curb and travelled through about 60 feet of yard before totalling 2 innocent vehicles in the driveway and damaging a third. It hit with such force that her car was stuck in the first grand Marquis and the second Marquis was moved far enough that it almost hit the house. Not bad for a much lighter car than the 2 she hit. Not wanting to do anymore damage to the poor guys nice lawn and not having any room to work, I set up on the main street and winched it all the way back to the road. This let the other company called have the entire driveway to work on getting the grand Marquis out. Almost a week later to the minute I got a call for an impound. I arrived at the location looking for a Chevy pick up, but only found a Saturn that had the driver's side almost completely removed. The trooper pointed to the house 3 doors down and there sat another lawn ornament. After it stuck the car, the pick up travelled through 2 chain link fences and a stand of shrubs before hitting a tree that luckily stopped the truck just short of making an unannounced appearance into the house. The yard was completely walled in by shrubs and the passenger front wheel was only being held on by half a tie rod. Only having a narrow driveway to set up in, I had to accomplish the recovery in a few different steps. I brought the truck out towards the opening in the shrubs as far as I could until I ran out of room. Once it was lined up and out of room, I moved into the street to winch it the last few feet before I had to to spin it into the driveway. I was planning on towing it once I got it to the street, but once I got the rear of the truck clear it became obvious that I was not going to have the time I needed to swing the front around to tow it on my own. I called my dad to bring me a bed while I brought the rear end around to line it up with the driveway. Once he arrived we loaded it up and I cleared the rest of the debris out of the driveway.
  27. 2 points
    While I'm always one to respect police, fire and other officials on-scene, I stick to my guns that I'm the professional tow operator on-scene and it's my job to load or tow in the manner that I'm experienced in doing. Putting hands-on anyone is an unacceptable practice, especially for a fire captain to do so. If the worker was untrained, inexperienced, or flat out flippant, a violent exchange is unprofessional. There may be something that occurred that we're not aware of, but at face value, fire captain's should stick to their line of work and not that of towing and recovery.
  28. 2 points
    brian991219

    Tower Down 05.31.19 (CA)

    Randy, as you well know, the root problem with training is so many bodies are in the class simply because their boss made them attend. With no real desire to be educated they don't practice what they were taught, hell I bet they don't even retain 10% of it. The onus is on the employer to enforce good safety discipline as well as provide options such as blocker trucks, flares, cones and other means to protect the work zone. However this costs money and will chase some of the workforce away, which in turn leads to higher rates. The hard sell will be with the wholesale customers, they must come to understand what the true cost of professional -read safe- service really is. What I see in this image supports my earlier hypothesis that the tractor trailer driver may not even be aware he hit something, especially pulling double trailers aka "wiggle wagons". If you look closely at the carrier there is no visible evidence of impact, it as well as the disabled vehicle are still straight in line, not even the mirror on the carrier is pushed in. I do believe having the bed at such a steep angle may have contributed to inadequate scene lighting, but again without all the evidence all I can is theorize at the moment. One thing I am sure of, this is a senseless tragedy that didn't need to happen.
  29. 2 points
    goodmichael

    Tower Down 05.31.19 (CA)

    A law is not going to protect you on the side of the highway. If you as a father, mother, son, daughter, husband, wife, are depending on a "law" to protect you from 80,000 lbs of steel and plastic and propelling down the road at 70 miles an hour, you need to go sell everything you own and put a bet down on the red marble at the roulette when in Vegas. You will have far better odds with the red ball. I stopped to assist a woman just yesterday who was stuck on the US 281 to IH 410 East bound flyover who had suffered a blowout. An Airport police officer stopped and shut down a lane to ensure that the vehicle could be tended to while minimizing the risk. Randy, Brian, myself, nor anyone else can ensure that you as a person work in a safe environment it is up to you. I am an advocate for OSHA getting belly deep into this industry and mandating that safe operating procedures be initiated. I hope, wish, and pray that they levy hundreds of 35,000.00 fines for companies that do not initiate and implement safety plans that will save lives. I hope that these fines cause business entities that do not make safety their number one priority to close. Yes, I hope they put companies that do not do everything in their power to ensure that their drivers go home safe completely out of business. I say this as someone who despises government. I hate government interference in business. But I hate for people to die needlessly on the side of the road when it is totally preventable. I say this with the understanding that there is no way to prevent all deaths on the side of the road. The risk will never be 100% mitigated. But the 65 people who will die on the side of the road can be reduced to single digits. One death is far too many. But 65 is totally unacceptable to me, and it should be to you too if you are reading this. Someone asked previously who the industry leaders were. The industry leaders are YOU. YOU are the one who has the power to make a difference. YOU are the person who has the opportunity to refuse a call when all precautions are not met. YOU are the one who has the capacity to demand a safer work environment. YOU are the one who pays the ultimate price if a perfect storm of misfortune meets at the location you are working as a service provider. When I had a heated exchange between a state trooper and myself when he arrogantly refused to close a lane for me to work safely and I proceeded to tell him how things were going to work, it preempted a meeting with his command staff. We all came to an understanding on what roadside safety meant. When I asked how many lanes and how many hours the road would be closed if I were a fatality victim, they had not answer. We now have a much deeper understanding of respect for one another after me walking from a crash scene. And they are well aware that I would do it again in a heartbeat.
  30. 2 points
    EdsTowing

    Camper Season...

    Had a new Super Duty pulling a new 5th wheel stuck at the Pocono Raceway Campground today.The guy was new to the camping world so he wasn't sure how to get the trailer out without doing damage... We backed him in to rehook it. He had tried earlier and stabbed the tailgate through the front compartment panel of the trailer.... Got him all out on the blacktop and he was ecstatic!
  31. 2 points
    There is no car that is worth putting another human being's life in jeopardy. TDLR would do well to stop just being a money tick and do something worthwhile and mandate that those who repossess vehicles or collateral at least be familiar with what a breach of the peace, illegal acts, as well as the fair debt collection practices act is all about. This incident at least fails the breach of the peace standard. I am not kicking a person when they are down, but a person died for a piece of crap hunk of plastic and tin with a mile of copper wire thrown in. Every car is a piece of crap compared to a human life. I have repossessed vehicles and been in a tight spot or two. If in doubt I will release the car. I found it once, I will find it again. There are 7 million car notes that are 90+ days so even if I do not, they are like Lay's potato chips, they will make more.
  32. 2 points
    My truck has the steel cab, lighter duty trucks went to aluminum before the 650s did... to answer your question about buying it all over again if I had to it’s a catch 22. At the time I purchased this particular truck because I wanted an extended cab, 26k lbs truck with a cab and a half. I also had a falling out with my local international dealerships service department, after a half butted repair on a 4300, so I told them I swore off international, that left me with freightliner or ford, I opted for the ford because of the warranty primarily, and it was almost 10k dollars less then a comparably equipped FL... the only real drawback I found with my truck is the small cab, at 6’2” my legs get very restless driving after a couple hours, and it gets very cramped with a couple passengers. My bed angle with the air ride dumped is right close to 10 degrees, without the shark tail bed... hope this helps anyone looking!
  33. 2 points
    Njsss

    A Medium With A Light

  34. 2 points
    Orcas Tow

    "Hiding" Towmate Transmitter

    I hard wired mine in my overhead light bar, dry & high up for a good un obstructed signal.
  35. 2 points
    All towers should have TIM training for obvious reasons, but also to have that coveted certificate in their personnel/training file when it comes time to defend a driver and the company against civil lawsuit. A recent high-dollar California lawsuit was based on a tow operator's training as a Freeway Service Patrol operator being sued. His training was heavily attacked, but the tower had FSP, CHP, and current TIM training to uphold his experience. Four-hours time to complete FREE training is chump change to a multi-million dollar lawsuit. And, yes, I am a TIM instructor in California. R.
  36. 2 points
    As seen on youtube: Heavy Duty Operator Rob Long recovering a truck that rolled onto its side.
  37. 2 points
    Njsss

    Close 1 W/Dollies

  38. 2 points
    Donny Callahan

    Pictures Tell The Story

    Pick, rotate, lay down, load and haul oversized allenstowing said: Did it grow between pis 2 and 3? Looks good. Donny Callahan said: I wiggled my nose and made it shorter... Lol... It was 20' high and 10' wide bulldog1635 said: very impressive. looks very close to the wrecker. what size NRC is that ? al, bull dog Donny Callahan said: It's a 40/50 SR The tank really isn't that close... The pictures turned out funky... MTA415 said: sweet graphics!
  39. 2 points
    Joanne Blyton of Billings Towing & Recovery, Montana, has been elected 2019 TRAA President. Joanne is the first woman to hold this position in 40 years. A long time member of Tow411 and now TowForce, member name "speedracer". Join us as we send our congratulations on a rise to the top, for a woman who truly earned it. TRAA "Towing & Recovery Association of America Tow411 - "Towing Information Network" Her Candidate Bio is available online at http://traaonline.com/wp-content/uploads/2019/02/Joanne-Blyton.pdf
  40. 2 points
    ESC

    Recover This -

    This one is in the water..... assuming it at least has liability coverage on it, it would be a pretty easy one to get paid on. Personally, I would call in a friend with a rotator and have them set it on my bed. I would also make sure to have some absorbent pads and booms ready to absorb any fluids out of the water. Lots of pictures.
  41. 2 points
    Njsss

    Newest Addition

  42. 2 points
    Littletow

    AT ShowPlace Las Vegas Roll Call

    I and APTRA will be there in full force! Stop by our booth!
  43. 2 points
    rreschran

    AT ShowPlace Las Vegas Roll Call

    Headed to Las Vegas teaching 2x seminars for American Towman. Lookin' forward to it. See you there Ron & Chris. R.
  44. 2 points
    Tow411

    Some Suburban Wrecker Nostalgia

    Topic Originally Created by wreckmster in June of 2007: ere are some photos of trucks no longer with us. Our First wrecker... "HOOK" GMC with a 30 ton Wreckmaster rig Our second truck "THE BOSS" It was a slug. 318 Detroit engine(no turbo) with a 30 ton Wreckmaster rig with extendable booms. Our third truck. "BEAR" GMC with 25 ton Wreckmaster rig Early Fleet photo That's little ole me on the left with the baseball hat. My brother is next to me, then my father followed by two former employees. truck 4 Newer cab and chassis on original 30 ton Wreckmaster bed (loud Air starter) LOL Truck 6 we built for my brother. It was a 1980 brigadier and had a 25 ton wreckmaster rig with custom length booms. they were about 2 ft longer than the standard boom. Great towing unit Truck 6 is towing my first truck I built and drove.Which I drilled many a hole in the frame to build. Frame drills were heavy back then. It is also a Brigadier, but had the 30 ton body with the extendable booms from truck 2. My truck is being towed because I had a severe knee injury and would be out of work for awhile. He was towing it back to the shop. GMC General 30 ton unit (great truck) I spent most of my time in this unit. Our most disappointing truck 97 Freightliner with 25 ton Jerrdan unit I'll see If I can find some other pics FMS Mike said: Awesome Pics!!! Them are some hosses!! Michael ------Michael Vibert------- Da Wash Boss said: Those are some really nice trucks. Were you guys one of wreck masters biggest customers,,,,, Just some really nice units there. That road boss looks good as does the General. I notice in the first picture that "N" model Ford box truck in the background,, thats a nice truck also. Thanks for sharing you guys paid your dues over the years, nice trucks then and some nice ones now as well. Good luck in the future. Danny Cassello - TRPC - East Hartford, CT OldHolmes460user said: very nice collection of pics. How old is your family business? underdog said: Those were all great trucks. Bet you wish you kept at least one of them! Stay safe, Rich. wreckmster said: Thanks for the comments. Our Business was established in 1976. I do wish we still had the GMC General. All around good towing and winching truck. Rode like a brick though with the Hendrickson rears.. (Ouch) Gale25yrs said: Why was the Freightliner such a disappointment? Too heavy? wreckmster said: The Freightliner was just a trouble truck. It was cheaply made. The doors echo'd when you closed them. The visor kept falling off and cracking the roof. For some odd reason it squatted really easy even with increased air ride pressure. It had one of the early style Jerrdan rigs with the older lift cylinders. You know the ones that if you moved the boom under load and it was out of it's channel, the boom would shift and take out the fog light. You could use the winches, but not the boom under load. We had alot of problems with the rear axles. We would go through about 2 axles a year and that was with a good operator. It towed pretty well though, just wasn't very dependable. It struggled with dropped trailers and since the boomed moved, I was hesitant on send it out. I just cut my losses and sold it for a bigger truck. The tandem axle Pete/35 ton Jerrdan we replaced it with has been a good combination so far for the most part. Michael212 said: Thanks For Sharing! It's always pretty cool to see where you started and see where your at today. Keep up the Good Work! Michael Myers Heavytowman12 said: You had nice equipment back then just like you do now. Wreckmaster made a real nice rig.Operated one for a few years on a Autocar.Those Briggaders were real poplar trucks then. Bet you wish you still had one of those. Just for keep sake! fredstowingnj said: I remember the old Wreckmaster plant in Cranbury,NJ. Da Wash Boss said: Hey Fred, I never knew thats where the wreck master plant was. If I remember correctly I think Roadmasters Towing had some dodges or gmcs with wreck master units on them. I am not sure thought maybe you would know if not I bet Steve or Bob remembers. They were nice trucks. Danny Cassello - TRPC - East Hartford, CT geartow said: now if i could find parts for a wreckmaster 25 ton id love it FredsTowingnj said: Don't really know much about RoadMasters Steve or Bob would know more then me.But yes Wreckmaster's plant was on Cranbury South River Road in Cranbury,NJ Auto Rescue said: Worse yet I remember when they built it Recovery Inc said: Those wreckmasters looked alot like Holmes were they close in competition. Great pics thanks for showing. Chris Fontaine Interstate Towing Da Wash Boss said: QUOTE: "Those wreckmasters looked alot like Holmes were they close in competition." They may have looked close and they were great units but,,,,, There is nothing that comes close to a holmes. How many agree with me on that about Holmes. Danny Cassello - TRPC - East Hartford, CT wreckmster said: not much of a difference between the two really. The Wreckmaster winches were backwards.....basically they were practically duplicates. I wouldn't say Holmes was any better or worst.. I personally put my Wreckmasters to the test. They faired very well.. wstowing11 said: Bringing back memories of riding with Dad and the other guys when I was a little kid. When we sold them old trucks we really wanted to get the newer ones at the time, but it sure would be nice to have a few of them around to remember the good ol days !!
  45. 2 points
    Whenever something is being towed, additional securements should always be attached. This doesn’t just apply to wreckers - secondary attachment chains should be attached even hauling a trailer, boat trailer or camper. These chains are there for an obvious reason: to prevent an accident in the event of an attachment failure while towing. But why does WreckMaster insist that the secondary attachments are always crossed? It prevents casualty from veering into traffic Probably the most important information on this list, crossing your chains ensures that the casualty will stay behind your truck in the event of a disconnect from the wheel lift/underrearch. If the chains were parallel and went straight back to the casualty, they would be able to veer and swing freely in both directions and potentially into other vehicles. When the chains are crossed, the casualty is prevented from veering too far in either direction and will instead stay behind the wrecker. NOTE: in the event of a disconnect, be sure to slowly change lanes and reduce speed to avoid the casualty from slamming into the back of the wrecker. It affects turning Secondary attachments can be affected by turning in two ways: You can use the shortest amount of chain and it will make less contact with the ground. If the chains were to be connected parallel and go straight back to the casualty, one of the chains would become too tight whenever turning. For example, when a wrecker turns right, the distance between the left side of the wrecker and the left side of the casualty increases. On the opposite side the chain continues to slack thereby making contact with the ground. By crossing the chains, the amount of chain required is reduced and therefore you will minimize the likelihood of your chains contacting the ground. They Can go above or under the under reach When the chains are crossed, whether they go above or below the wheel lift does not matter. Why is this important? It means that securing to the most logical attachment point becomes easier. Cross the chains over the under reach also helps keep the chains from making contact with the ground while turning. There are benefits to both: Crossing the chains beneath requires more chain but they will not interfere with any other equipment such as towing lights or scratch the under reach. Crossing above can scratch the under reach but requires less chain. or Just be sure that whether you cross them above or below the under reach that they will not interfere with any other pieces of equipment, such as the towing lights. View the full article on WreckMaster.com...
  46. 2 points
    Matjackman

    Matjack 3 Day Factory Class!

    2019 Matjack factory team for the spring session has ended. Thanks to all that participated. Jeff Martin, Howard "scooby" Eagan, Jamie Dougherty, Bruce Pedigo, Dale McLaughlin, Matt Bartlett. #matjackspring2019
  47. 2 points
    Cargo: High end plastic rolls on the side. Thanks to Montague Police and Turners Falls Fire dept, and a special thanks to my great crew, T. J., Bill Wong, Tom Kurtyka Jr., Jake Browning and Samantha Browning, Nice job!!!
  48. 2 points
    luigi

    Adding some goodies to our wrecker

    We got this truck at the end of last year. Our last wrecker had 2 tunnel boxes and this one only has 1, so we were a little short on storage. We added 3 additional boxes. My boss has also let me add stuff to make things more efficient. Simple stuff first, 2 buckets for floor dry/debris 2 Boxes have been placed on each side of the bed, which did make it difficult to watch the winches. So mirrors were added to aid with that. Again, the boxes make backing up to a car difficult to see it. All of our trucks have on board dvr, with 4 cameras. I added a monitor to be able to see. This truck has a compressor and tank, but no gauge, or air hook ups. We do alot of ppi's, and have to call another company to remove any trailers with air. I added an air hook up so we can move empty trailers, or equipment trailers. Also added a psi gauge, I ended up changing the fitting on the back of the gauge so it would fit though. Now my personal favorite addition. The flood lights in the back were......lacking. I had a 42" curved light bar at home that I wasn't using and added to the truck. I also got some smaller led spot/flood lights to add under the tunnel box to aid with nighttime reversing. Before After (That is also just the upper lights. Lowers were not turned on) Lower lights
  49. 2 points
    Still here🇬🇧🇬🇧
  50. 2 points
    So many reading and this new system only registers logged in member views. If you're a regular lurker registering has never been easier. Do It Now! Please Doing so will get TowForce closer to a A New Platinum Sponsor that will participate. However, if we cannot reach the 6000 members by June 11th, we prove them right. The Towing & Recovery Industry is just too small of a market for them to expand into. This potential new sponsor wants to get you to their website as they introduce new products. The have also agreed to post in the General Equipment forum with the goal of having a dedicated forum. The traffic is here, we just need to get the numbers up. That means both membership and topic participation. The message board had good traffic even after it broke. However, it became like "Read Only". Do not let this community go in that direction. Thanks, Now Reply to the Roll Call.
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...