Quantcast
Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 06/30/2018 in all areas

  1. 5 points
    Ron ... you asked for a rant, or, a rah rah speech? Well ... here ya' go. No ... I'm not a state association, yet simply, a concerned individual who's worked much of my adult career training police officers and tow truck operators. For 30-plus years, I've been a career instructor and technical writer teaching white-line safety and the TIMs concept for tow operators. I have had my legs broken by an out-of-control vehicle while I worked a highway patrol recovery some 40-year's ago. I know what it's like to being critically injured at the hands of some motorhead because they were driving too fast for conditions in the rain. I know what it's like to think and rethink that incident asking, "What I could have done better to have lessened my on-scene exposure?" I felt guilty for having totaled my bosses tow truck, but, only because I was there to help serve law enforcement, not because it was my fault. It was at that very moment where I committed myself to learning and practicing on-scene safety. Since then, I have tracked highway related fatalities that go back as far as 1934, with nearly 950-operators killed for varying reasons; as many as 350-of those killed on the highways. I have written and reported on tow operator fatalities, helped bury many police officer and tow operator friends killed in the line-of-duty to the point I have grown weary of the repeated slaughter. But, I haven't lost my inner-fire with simple hopes that we'll somehow recognize a way to reduce the pandemic of tow operators killed. But, that comes with stirring the emotions of some tow operators and tow business owners who don't give a care about what their doing or how they're going about their daily tasks. We know that flares, signs, blockers, cops and whatever ... does take extra time, but the very fact of identifying a work-space that says, "HERE I AM", should be worth the time it takes. There are lessons to be learned here people ... we're not reinventing the wheel, but simply demand, "Do what you have to to make yourself seen; don't stand in active traffic lanes and stay OFF the white-line side." That's no-brainer stuff. How hard can that be? Sure there are incidents where distracted drivers will continue to crash into us working the highways. But, lessons learned from 350-tow operator fatalities has clearly identified that working on or near the white-line side is THE most dangerous place to be. Need I say more? I am a realist that understands that DUI's, texting and motoring stupidity are here to stay. Towers continue to put themselves in harms way. No ... not because of a lack of training, is it too much testosterone, or is it that overflowing macho that says, "Nothin's gonna' happen to me?" Without concern for hurting anyone's sensibilities, tower's ... stop worrying about the cops not being there, state associations not being involved, or those damned non-concerned highway drivers. You have NO control over what they do, but you have every bit of control about where you work and what you do to help save your individual life. It's your professional skills and on-scene processes that you that prayerfully will keep your name from being part of my fatality archives. Take control of your actions and stop worrying about what everyone else is doing. You should be telling yourself ... "Not me, not today", preparing yourself mentally that no punk driver is going to take you out based on your carelessness or complacency. On-scene safety is every operator's choice ... and NO amount of hand-holding or coddling by others will help keep you safe more than your own actions. In a nutshell, the cops aren't helping, the associations haven't stepped up and the motoring public simply doesn't give a crap. To me ... that presents a bleak picture of the industry's future. I will continue to help spread the word of safety and survival where I can. But, I can only pray for your safety. It's that, "lead them to water", kinda' thing. R
  2. 5 points
    Njsss

    Newest Addition

  3. 5 points
    Eric Fouquette

    Relax and Go Fishing

    Just to see what you can catch Source:
  4. 4 points
    We're never too far from an American flag, in fact the first picture here is our t shirt design but I had them add a bigger flag. We participate in both the Memorial Day and 4th of July parades each year with our flags flying high and proud. *Edited to add this year's 4th of July parade photo
  5. 4 points
    Randall, it's not the "we don't want to hurt anyone's feelings" attitude. It's the "it's never going to happen to me" attitude. If you can tell me what miracle it will take to wake these individuals in the industry up, then I will gladly help promote it. You do realize less the .5 percent of the industry can tell you how many tow operators have loss their lives roadside this year. I estimate that Less than 4% know there was a Tow Op killed this past Friday and as long as it doesn't effect them. They're Good...
  6. 4 points
    jrtowman

    Big changes in a year!

    Top picture was a year ago today and the bottom is what it looks like now.
  7. 4 points
    EdsTowing

    Updating The Support Trucks....

    My shop truck was looking a little tattered from a rough winter so we figured we would run it through our body shop for a new "suite" and then put our new logo on it... She came out pretty nice for a 300,000mi truck! Then off to the wrap shop.... I was happy with the results. My team did a good job on her & she's ready for another 10 years of service.
  8. 4 points
    This is the end result of almost 22 years of a painfully slow restoration.....and now is almost complete ......it still needs all the detailed pinstriping done and few other small items my sincere thanks go to Richard Kauff and the Autocar historic society for the registration and manufacturing information and technical help and advice ...... Pendell Towing and Kramers Towing for allowing me to clamber over their Autocars and take photographs of their superb trucks ... I have so far taken it to a few shows and have worked it in the show arena doing demonstrations of rolling trucks and busses over and uprighting ....all worked well No hydraulics and no electronics here ! But I worked muscles I forgot I had..... John ?
  9. 3 points
    Orcas Tow

    Scooby Doo almost into house.

    I had a call for a Subaru into a house. I arrived on scene to find a Subaru had gone beyond the parking blocks & was resting on the house with the transmission pan on top of a large cinder block. Probably could have used the flatbed but thought it may drag trans pan across cinder block & create a mess, needed lift on both front wheels but that would take 2 wreckers. I'm a small operation on a remote island, so if possible I always try & use what I have on scene. Using my 2001 F550 4x4 with a Chevron 408, twin 9,000 winches with swaged 3/8 wire rope I found a Holmes Tree placed about perfectly on the passenger side of the car for my needs. Using a ladder I choked a 3/8"grade 80- recovery chain/4 ton snatchblock up high on the tree for a high/rearward pull on the passenger side of the Subaru with my drivers side wire rope terminating to a WreckMaster K strap to the passenger front wheel, rigged my passenger side line directly to the Subarus drivers front wheel again terminating with a WreckMaster K strap/4x4 wood block creating clearance for strap to body. Boom up/out high for lift, blocks behind wheels for safety I engaged winches & brought the car back up onto level ground without any further damage to the house or car. Replaced blocks & confirmed no undercarriage damage, happy customer.
  10. 3 points
    Orcas Tow

    Scooby Doo almost into house.

    Thank you for the kind words, as you know most times we are under some kind of push from Law Enforcement, customer, time/safety to clear or simply the next call pending so we get the job done. Every once in a while I get one that is not time sensitive, am able to document & share for the better of the industry as a whole as you can explain techniques all day long but pictures are worth a thousand words.
  11. 3 points
    Njsss

    F450

  12. 3 points
    TowZone

    6000 Member in only 120 Days

    With the exit of AWDirect from the Towing Information Network after more than 14 years as a Tow411 Sponsor. I needed to find another “Major Sponsor” to support our network. While attending the NTEA Work Truck Show last week it just happened a “Well Known Company” offered to add their support and participation as a Platinum Sponsor on the New Force in the Industry. They had only one requirement and that was, we must double our membership within 120 days. At that time we had just reached a goal of more than 3000 members in 15 months. The next goal was set at 6000 members by the end of 2019. To do this in 4 months is nearly impossible as it will take 25 new members each day. This “Well Known Company” set the bar high, but that is nothing for an Industry that in general sets the bar high every day. If your not already a TowForce.net member will you register today and get us closer to this nearly impossible goal. Is it possible, yes however it would take everyone that watches this message board to join. You can join using various methods, there is no cost to join. DAY 1 - 58 New Members - Day 2 - 41 New Members - Day 3 - 20 New Members - Day 4 - 7 New Members - Day 5 - 6 New Members - Day 6 - 7 New Members - Day 7 - 2 New Members - Day 8 - 7 New Members - Day 9 - 7 New Members - DAY 10 - 4 New Members - Day 11 - 11 New Members - Day 12 - 5 New Members - Day 13 - 7 New Members - Day 14 - 10 New Members - Day 15 - 6 New Members - Day 16 - 8 New Members - Day 17 - 5 New Members - Day 18 - 5 New Members - Day 19 - 4 New Members - Day 20 - 7 New Members - Day 21 - 9 New Members - Day 22 - 5 New Members - Day 23 - 0 New Members - Day 24 - 17 New Members - Day 25 - 3 New Members - Day 26 - 2 New Members - Day 27 - 2 New Members - Day 28 - 4 New Members - Day 29 - 16 New Members - Day 30 - 3 New Members - Day 31 - 6 New Members - Day 32 - 13 New Members - Day 33 - 4 New Members - Day 34 - 5 New Members - Day 35 - 6 New Members - Day 36 - 5 New Members - Day 37 - 2 New Members - Day 38 - 5 New Members - Day 39 - 7 New Members - Day 40 - 27 New Members - Day 41 - 4 New Members - Day 42 - 0 New Members - Day 43 - 4 New Members - Day 42 - 1 New Member - Day 43 - 3 New Members - Day 44 - 15 New Members - Day 45 - 1 New Member - Day 46 - 6 New Members - Day 47 - 3 New Members - Day 48 - 4 New Members - Day 49 - 2 New Members - Day 50 - 2 New Members - 410 Current Count 3386 Members Average 8.2 a day - Short 17 Members a day.
  13. 3 points
    EdsTowing

    Pics Say A Thousand Words...

    The Boys were out tonight on the Interstate to bring in a F550 with a Turbo issue. The message board is really worthwhile to keep people moved over if possible.
  14. 3 points
    Hi John ... it's always so very exciting to hear from you across the pond. I hope you and your business are doing well. Thanks for your comments and I personally won't apologize for offending other towers when it comes to ... as you've so eloquently described ... "self-preservation". Perhaps that's one of the reasons why this industry is behind the curve is because we don't want to hurt anyone's feelings. Will towers ever wake up? Highway related fatalities are traced back to 1934 and the same old pig headed mistakes and actions have resulted in literally hundreds of towers killed. And, Like me and you John, I'm pretty sure most towers have their own "struck-by" stories to tell ... some non-preventable. Like the over-use and abuse of amber-light on all the time, perhaps the current feeling is ... "Nah ... it's just another tower killed ... glad it's not me." I guess we've grown numb to the root causes that continue to get tower's killed, but I'm interested in the tower you talked with about no safety vest. At some point John, if you do talk with the company's owner, please share what his reaction were. Best regard. R.
  15. 3 points
    Randall.....that is the most sobering and accurate piece of text I have read in a long time ....you are bang on the money !!! I too in my career have been hit twice, my son Graham had his leg smashed, we had 2 other guys also injured on seperate occasions, both had life changing injuries, Additionally we lost long term employee Terry Booth ......Terry died at the side of a busy road in the middle of the night....witnesses at the inquest testified that his truck was properly positioned with cones out and lit up like a, quote ... "Christmas tree" he had a comprehensive training record with all the regular refreshers ... And STILL it happened !!! The woman driver that hit him was DUI and went to jail ....my point is ...on this occasion all the training he had did not save him .. I whole heartedly agree with your points about self preservation at the roadside ...... Just this morning, on my way to the supermarket , I saw a tow truck at the side of the road half on the kerb and half on the carriageway......apart from the beacons on there was no cones or warning signs displayed the operator had no reflective clothing on, just shorts and tee shirt and worst of all, he was working on the traffic side of the truck ....I stopped and parked my car behind him with the hazard warning lights on....as a bit of warning to other traffic .... I said to the driver, don't you have any hi vis clothing ? Yes he said, I forgot to bring it .. This Tow truck is owned and operated by a very good company and the owner is a long time friend and colleague, he is very pro active with safety and training...he will be furious and dissapointed when I advise him what I saw ...... .your point about macho, testosterone, it wont happen to me ??. Case in point !!! NEVER TAKE THE JOB FOR GRANTED .....NEVER DROP YOUR GUARD . The constant loss of life at the roadside is an absolute tragedy .....but if 1 life can be spared through increased reflectivity, hi visibility clothing, awareness training.... Then it is worthwhile .... Sorry if I have bored or offended any one but , self preservation is the key ...no matter what country or language it is in John.
  16. 3 points
    rreschran

    Tower Down 05.31.19 (CA)

    Right on Brian. But, forget about the costs. Cost shouldn't be a factor in safety and prevention. In all business plans, that should be the first consideration is how to keep a company's employees safe in the work-place. And, that's accomplished by safety, processes and training. We know it ... we see it ... we teach it. But, where is safety lost in translation when tower's can't retain even 10-percent? I'll go out on a limb here to suggest that on-scene safety is the responsibility of each tow company owner. It's each owner's responsibility to make sure towers have the, "mental tools and preparations", before sending their personnel onto the highway. I personally feel the industry has lost it's sense of safety by making bling and monster-tow trucks the priority while safety and survival scrapes the bottom of the proverbial barrel. I evidenced that recently by noting seven, only seven attendees, including you Brian, attend a PTSD seminar versus that of seeing literally hundreds of towers watching a rotator being run through its paces at the same tow show. It's evidenced in these posts where only a handful of personalities have the guts to approach those procedures and processes that get tower's killed. When an industry doesn't care about it's people, its current state will only get worse before it ever gets better. We know the issues, so, what's it take to overcome the lack of safety awareness in a proactive manner? One can't expect to peer down the barrel of a gun with the possibility of being shot in the face right?
  17. 3 points
    We had to rescue this lady the other day who decided a soaking wet farm field was the best place to turn around. Not 500 feet further down the road is an intersection with a nice hard packed dirt spot to turn around, but I guess she couldn't wait that long. Nice easy pull back to solid ground.
  18. 3 points
    EdsTowing

    Rollover With Clean Up

    Explorer lost control in the rain on a sharp "S" curve & rolled into the woods.... Lots of glass & debris to clean up... Now the fun starts...Property Damage Liability Claim....
  19. 3 points
    EdsTowing

    Early morning Roll....

    Eddie grabbed this one this morning.... Wrapped up in a few minutes...then a beauty shot...LoL
  20. 3 points
    EdsTowing

    Annnnd Another Rollover...

    Jeez 3 rollovers this weekend...all with clean ups too! This one tumble rolled in a private community w/ 25 mph speed limits... She said she swerved because a Goffer ran across the road... They cleaned up the roadway and told the Officer we would be back in the daylight to do a proper clean up.... Destroyed a new Journey...Customer called me to ask if it was driveable? I asked weren't you in it & she said yes....No...No it's not driveable...
  21. 3 points
    As of recent, i think both of us thought the days where over, but here we are. Nothing has been more enjoyable than teaching with this guy, Jeff Martin We at times argue like brothers over class logistics and stuff, but you folks see the end result. Add the other folks and we have a great time. Nobody, I'd rather have by my side. Love ya brother
  22. 3 points
    EdsTowing

    Another Rollover...

    Customer trying to avoid a stopped car & ran off the road. It hit a stone wall & flipped over... A nice "quicky" in & out job...
  23. 3 points
    BigBlonde

    AT ShowPlace Las Vegas Roll Call

    Glenn and myself will be there
  24. 3 points
    ttroseledge

    Progress on 70 Ton Rotator

    There's a lot of red to get rid of, new body and front boxes taking shape, new proportional remote, adding 35k D P 2 speed drag winch and rear 3 stage outriggers. Thanks to TJ ,Jay , and ,Bill Wong UPDATED: More progress shots on 70 ton dewalt, new sides taking shape, unit sanded, braces added to boom base, all new hoses in place, additional valve section installed in valve body, ready to add 35k 2 speed drag winch, new proportional remote ordered.
  25. 3 points
    Randall Resch, Alpine CA. - Operations Editor, American Towman Magazine, retired police officer San Diego Police Department, and Senior Off-Road Recovery Engineer, Naval Special Warfare since 1967. Thanks Ron and Chris for providing the Number one forum that brings towers together.
  26. 3 points
    I'll have to get a pic of it tomorrow George. We took their unit and welded a receiver tube on it. Now we have a pintle hook adapter and a 3 way ball assembly. We also install a factory ford trailer plug in the rear. It makes for a clean install for a 4 wire & 6 wire plugs. She got her new suit on today... I think it looks good....
  27. 3 points
    EdsTowing

    Rollover w/ Plenty Of Rolls....

    Well Ron you're right...no yellow trucks but they were there in spirit! I owe a lot to those people and Big Wheel changed the way I do things literally the day after my 1st class.... nearly 10 years ago. And when I presented my invoice to a typically difficult insurance company, they didn't have a single complaint. My connections made back then have & will continue my business's prosperity for years to come as well as friendships that are priceless. Stuart you're right...I was dreading these rolls as soon as I found out. I knew if I was to drag them out the back and load them on a trailer or carriers, they would be junk for sure. To make matters worse, they have a small hole (7/8") in the middle so rigging to them could be tricky... I knew it would be difficult to lift that dead weight in such a confined area but handling them was potentially dangerous . Like John said, I was concerned that they would move around when the trailer dropped and @ 6000 lbs each...they can make a difference! Wet set it pretty easily, I think I have a video of it...a slight bounce but not much drama. The rolls were damaged some but from their initial movement. They decided to scrap the load in the end so it is what it is. Thanks Randall. We were taxing the Tator pretty good so I decided to add my second line off a block to the drives just in case. It turned up to be a good idea because it was starting to stall the auxiliary winches and the main boom winches were getting the outriggers "Light". A lot of guys really push them but I don't know this truck well enough to exceed the platform. That added line made the difference though to get the initial lift to start & then from there it was like text book. Thanks for all the comments.
  28. 3 points
    goodmichael

    Just a suggestion

    I have a suggestion that I believe could promote a safer work environment for all that read this forum. Would it be possible to start a forum entitled, "Today I made an attempt to be a safer operator by...… This will allow those people who practice safety and proper procedure to share their experience, knowledge, education, and training. One of the suggestions just might prompt someone out there somewhere, to do something different, to put another tool in their mental toolbox, to zig where they normally would have zagged. Who knows, just one person implementing a safe practice or procedure could save someone, somewhere from getting seriously injured, or from someone from having to make that phone call everyone knows that they might have to make, but cringes at the thought of having to make the call.
  29. 3 points
    Here's sad news of a tow operator fatality that occured early this morning making this the first fatality of 2019. According to the news, tow operator, Pat Sisneros, of Madrid Towing, was struck and killed as he attempted to assist a NM state police officer. According to State Police, a semi-truck crashed into a State Police vehicle just before 1 a.m. Police say Pat Sisneros stopped to assist the officer when another semi collided into Sisneros' tow truck, killing him. All lanes on I40 Eastbound MM 157 were closed due to the motor vehicle accident involving the second semi-truck. It was also reported that 20-degree temperatures caused lanes to be were extremely icy. Details are few and an investigation is being on-going. My prayers are with the Sisneros' family and the company Pat worked for. https://www.kob.com/albuquerque-news/albuquerque-roads-slick-and-dangerous/5196197/
  30. 3 points
    While this is not the time for such discussion, it must be discussed before an action plan can be put it place. "My gut feeling is the electronic logging mandate, although artificially, has placed increased pressure on drivers to "push through" because of that set in stone digital clock staring them in the face." I have been hearing this louder and louder that because of the ELD. The dispatchers are pushing the drivers harder. One trucker stated he is one of the few English speaking drivers in the company and he has to routinely tell the person is is speaking with the speak English and to text in English. So, drivers are now be pushed harder. Wasn't that what the CDL and ELD was suppose to stop?
  31. 3 points
    We are entering the apex of the Christmas season this weekend. Colleges are completing final semester exams this week. I have one tomorrow, my last one, thank you God. Many will begin to drink as well as use illegal drugs under the guise of "celebrating." Please be extra cognizant in every step of every process you complete to limit the time you are in harms way. It is not a race, nothing you do is worth risking your life in order to save a few seconds. Your family needs you, your community needs you, and this industry, despite all of it's issues, needs you as well. Each and every one of you is a valuable resource to those close to you. There is no tire, or vehicle for that matter that is worth you risking your health, well being, or life over. that car or tire can be easily replaced, you can not be! I hope every one of you has a blessed, safe, and meaningful Christmas as well as a bountiful 2019. I personally have had a rough 2018, and am ready to close the chapter and look forward to a great 2019.
  32. 3 points
  33. 3 points
    annettemcd

    2018 Motor Club Ranking

    1. Geico --pleasant dispatchers who really seems to care about motorists, fast payment, easy invoice submission, decent rates 2. AAA (NCNU) --When we were part of MountainWestAAA and that was great, now it is Northern California, Nevada, Utah, Arizona, Alaska, Montana, and Wyoming and nothing is the same. 3. Agero --commonly confused about location and destination (a common one has been closed for 6 years), complex procedure for requesting extras, short pays not uncommon, poor communication, commonly lies to us and to motorists about the covered distance. Only 6 jobs so far this year with any other motor club.
  34. 3 points
    A Sneak Peak at the of Monsters that Metro Tow Trucks will have at the American Towman Exposition, this month. Hope to see and meet you there, This should be our Biggest year ever, Thank You all for the support!
  35. 3 points
    Dat1

    Rolls Royce Phantom

  36. 3 points
    Rigged a semi for a reverse roll .... using 1 medium duty wrecker one winch triple rigged to lift and one winch single line to restrain Nick Ovenden preparing to operate the 30 ton / metre knuckleboom crane the latest 3 axle accident unit based on a Mercedes chassis 8 ton payload on the platform note the PPE Preparing the Century Rotator for a spreader bar lift .....
  37. 3 points
  38. 3 points
    EdsTowing

    Three Wheel Action Challenger

    You did a fine job...I have no problems with it. I carry a rubber mat in my 650 for laying under vehicles pulling driveshafts. I also use it on the deck to set pieces like this if needed. I use it all the time when I take the shoes off the wheel lift to use forks. So now if you want some constructive criticism...(and maybe you don't?)...the only problem was dropping it in the customer's driveway. A late model vehicle like that w/ full coverage...I would make every effort to take that to my shop and put it through insurance. That car has maybe 5 grand in damage and it will certainly go through insurance for repairs. Sell the job! Tell them it can go to whatever body shop they like in the morning. Do whatever you can make the decision easy for them. Take them home, get them a rental...whatever you can do. Just add any time to the invoice. I have set up limo or Car service for customers trying to get home to a distant location. You could double the value in that job over taking it home. Just an observance...if it was possible.
  39. 2 points
    Orcas Tow

    Bring the small truck he said.

    I got a call for a flatbed C30 in a ditch with roofing material in it, I said what's the weight, he said not much bring the small truck . Nick & I brought the 2001 F550 with a Chevron 408 & found a fully (over) loaded C60 with asphalt roofing backed in the ditch, guess they had difficulty getting it up the hill & backed into the ditch, lucky it didn't roll as it had a hard twist/lean. Guessing at 25,000lbs, good thing we have Holmes trees in the area, scotch blocks chained to rear D rings, drivers winch line low to the tree then a 3 part to the drivers side frame rail for a low pull, passenger side winch line 2 part high from the boom to the passenger side frame rail for an upward pull. Engaged the winches & she came right out.
  40. 2 points
    brian991219

    Tower Down 05.31.19 (CA)

    Randy, as you well know, the root problem with training is so many bodies are in the class simply because their boss made them attend. With no real desire to be educated they don't practice what they were taught, hell I bet they don't even retain 10% of it. The onus is on the employer to enforce good safety discipline as well as provide options such as blocker trucks, flares, cones and other means to protect the work zone. However this costs money and will chase some of the workforce away, which in turn leads to higher rates. The hard sell will be with the wholesale customers, they must come to understand what the true cost of professional -read safe- service really is. What I see in this image supports my earlier hypothesis that the tractor trailer driver may not even be aware he hit something, especially pulling double trailers aka "wiggle wagons". If you look closely at the carrier there is no visible evidence of impact, it as well as the disabled vehicle are still straight in line, not even the mirror on the carrier is pushed in. I do believe having the bed at such a steep angle may have contributed to inadequate scene lighting, but again without all the evidence all I can is theorize at the moment. One thing I am sure of, this is a senseless tragedy that didn't need to happen.
  41. 2 points
    goodmichael

    Tower Down 05.31.19 (CA)

    A law is not going to protect you on the side of the highway. If you as a father, mother, son, daughter, husband, wife, are depending on a "law" to protect you from 80,000 lbs of steel and plastic and propelling down the road at 70 miles an hour, you need to go sell everything you own and put a bet down on the red marble at the roulette when in Vegas. You will have far better odds with the red ball. I stopped to assist a woman just yesterday who was stuck on the US 281 to IH 410 East bound flyover who had suffered a blowout. An Airport police officer stopped and shut down a lane to ensure that the vehicle could be tended to while minimizing the risk. Randy, Brian, myself, nor anyone else can ensure that you as a person work in a safe environment it is up to you. I am an advocate for OSHA getting belly deep into this industry and mandating that safe operating procedures be initiated. I hope, wish, and pray that they levy hundreds of 35,000.00 fines for companies that do not initiate and implement safety plans that will save lives. I hope that these fines cause business entities that do not make safety their number one priority to close. Yes, I hope they put companies that do not do everything in their power to ensure that their drivers go home safe completely out of business. I say this as someone who despises government. I hate government interference in business. But I hate for people to die needlessly on the side of the road when it is totally preventable. I say this with the understanding that there is no way to prevent all deaths on the side of the road. The risk will never be 100% mitigated. But the 65 people who will die on the side of the road can be reduced to single digits. One death is far too many. But 65 is totally unacceptable to me, and it should be to you too if you are reading this. Someone asked previously who the industry leaders were. The industry leaders are YOU. YOU are the one who has the power to make a difference. YOU are the person who has the opportunity to refuse a call when all precautions are not met. YOU are the one who has the capacity to demand a safer work environment. YOU are the one who pays the ultimate price if a perfect storm of misfortune meets at the location you are working as a service provider. When I had a heated exchange between a state trooper and myself when he arrogantly refused to close a lane for me to work safely and I proceeded to tell him how things were going to work, it preempted a meeting with his command staff. We all came to an understanding on what roadside safety meant. When I asked how many lanes and how many hours the road would be closed if I were a fatality victim, they had not answer. We now have a much deeper understanding of respect for one another after me walking from a crash scene. And they are well aware that I would do it again in a heartbeat.
  42. 2 points
    EdsTowing

    Lets Lower The Statistics...

    We are sending our Crash Van out on interstate calls where there is a danger factor. Adverse weather, fog & what not...in an attempt to slow people down & move them over. As you can see, it works for the most part...
  43. 2 points
    someotherplace

    Stuck In Park, 4WD & Park Brake

    Yep, no more disconnecting linkage on RAM trucks since 2011-2012 I think. They *look* like you can disconnect it but you can't shift, as you discovered. And, on Mopar fullsize cars since 2008. BUT, there is a release inside the vehicle on most. I usually don't mess with them being full-time PPI as I do not have keys. However if you're on a consent tow there is a release cord inside the cars console, and on the trucks I believe it's to the left of the column in the dash after you pop a panel off. Richard
  44. 2 points
    As seen on youtube: Heavy Duty Operator Rob Long recovering a truck that rolled onto its side.
  45. 2 points
    EdsTowing

    Surprise, Surprise, Surprise....

    Got home from the Florida show yesterday & my son surprised me with a new truck! Two of my grandkids explained all of the technology & how stuff works.... Oh and "Dallas" waiting to go for a ride. My wife & I are blessed with great kids & grandchildren....
  46. 2 points
    Still here in United Kingdom
  47. 2 points
    Minchar

    Slow Down & Move Over

    I like it, simple and to the point. Great work!
  48. 2 points
    The 2018 Tow Show showcased the very latest products available from the UK and Europe manufacturers.. .. below are just a few shots of a 9 foot wide Faymonville extendable recovery trailer on 5 axles, all steer axles, twin winches, payload Up to 90 tons manufactured in Holland
  49. 2 points
    A selection of medium duty wreckers ^.
  50. 2 points
    A few examples of heavy wrecker from Boniface engineering and Dave bland engineering
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...