Quantcast
Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 05/17/2018 in all areas

  1. 5 points
    Ron ... you asked for a rant, or, a rah rah speech? Well ... here ya' go. No ... I'm not a state association, yet simply, a concerned individual who's worked much of my adult career training police officers and tow truck operators. For 30-plus years, I've been a career instructor and technical writer teaching white-line safety and the TIMs concept for tow operators. I have had my legs broken by an out-of-control vehicle while I worked a highway patrol recovery some 40-year's ago. I know what it's like to being critically injured at the hands of some motorhead because they were driving too fast for conditions in the rain. I know what it's like to think and rethink that incident asking, "What I could have done better to have lessened my on-scene exposure?" I felt guilty for having totaled my bosses tow truck, but, only because I was there to help serve law enforcement, not because it was my fault. It was at that very moment where I committed myself to learning and practicing on-scene safety. Since then, I have tracked highway related fatalities that go back as far as 1934, with nearly 950-operators killed for varying reasons; as many as 350-of those killed on the highways. I have written and reported on tow operator fatalities, helped bury many police officer and tow operator friends killed in the line-of-duty to the point I have grown weary of the repeated slaughter. But, I haven't lost my inner-fire with simple hopes that we'll somehow recognize a way to reduce the pandemic of tow operators killed. But, that comes with stirring the emotions of some tow operators and tow business owners who don't give a care about what their doing or how they're going about their daily tasks. We know that flares, signs, blockers, cops and whatever ... does take extra time, but the very fact of identifying a work-space that says, "HERE I AM", should be worth the time it takes. There are lessons to be learned here people ... we're not reinventing the wheel, but simply demand, "Do what you have to to make yourself seen; don't stand in active traffic lanes and stay OFF the white-line side." That's no-brainer stuff. How hard can that be? Sure there are incidents where distracted drivers will continue to crash into us working the highways. But, lessons learned from 350-tow operator fatalities has clearly identified that working on or near the white-line side is THE most dangerous place to be. Need I say more? I am a realist that understands that DUI's, texting and motoring stupidity are here to stay. Towers continue to put themselves in harms way. No ... not because of a lack of training, is it too much testosterone, or is it that overflowing macho that says, "Nothin's gonna' happen to me?" Without concern for hurting anyone's sensibilities, tower's ... stop worrying about the cops not being there, state associations not being involved, or those damned non-concerned highway drivers. You have NO control over what they do, but you have every bit of control about where you work and what you do to help save your individual life. It's your professional skills and on-scene processes that you that prayerfully will keep your name from being part of my fatality archives. Take control of your actions and stop worrying about what everyone else is doing. You should be telling yourself ... "Not me, not today", preparing yourself mentally that no punk driver is going to take you out based on your carelessness or complacency. On-scene safety is every operator's choice ... and NO amount of hand-holding or coddling by others will help keep you safe more than your own actions. In a nutshell, the cops aren't helping, the associations haven't stepped up and the motoring public simply doesn't give a crap. To me ... that presents a bleak picture of the industry's future. I will continue to help spread the word of safety and survival where I can. But, I can only pray for your safety. It's that, "lead them to water", kinda' thing. R
  2. 5 points
    Njsss

    Newest Addition

  3. 5 points
    Eric Fouquette

    Relax and Go Fishing

    Just to see what you can catch Source:
  4. 4 points
    We're never too far from an American flag, in fact the first picture here is our t shirt design but I had them add a bigger flag. We participate in both the Memorial Day and 4th of July parades each year with our flags flying high and proud. *Edited to add this year's 4th of July parade photo
  5. 4 points
    Randall, it's not the "we don't want to hurt anyone's feelings" attitude. It's the "it's never going to happen to me" attitude. If you can tell me what miracle it will take to wake these individuals in the industry up, then I will gladly help promote it. You do realize less the .5 percent of the industry can tell you how many tow operators have loss their lives roadside this year. I estimate that Less than 4% know there was a Tow Op killed this past Friday and as long as it doesn't effect them. They're Good...
  6. 4 points
    jrtowman

    Big changes in a year!

    Top picture was a year ago today and the bottom is what it looks like now.
  7. 4 points
    EdsTowing

    Updating The Support Trucks....

    My shop truck was looking a little tattered from a rough winter so we figured we would run it through our body shop for a new "suite" and then put our new logo on it... She came out pretty nice for a 300,000mi truck! Then off to the wrap shop.... I was happy with the results. My team did a good job on her & she's ready for another 10 years of service.
  8. 4 points
    This is the end result of almost 22 years of a painfully slow restoration.....and now is almost complete ......it still needs all the detailed pinstriping done and few other small items my sincere thanks go to Richard Kauff and the Autocar historic society for the registration and manufacturing information and technical help and advice ...... Pendell Towing and Kramers Towing for allowing me to clamber over their Autocars and take photographs of their superb trucks ... I have so far taken it to a few shows and have worked it in the show arena doing demonstrations of rolling trucks and busses over and uprighting ....all worked well No hydraulics and no electronics here ! But I worked muscles I forgot I had..... John ?
  9. 4 points
    Well with all do respect, it's my opinion that this procedure was done incorrectly. I don't mean this as a criticism but would like to reflect on a couple of things. First off you came up with the 30k casualty had 50 some thousand lbs of resistance but chose to do the job with 1 single line? It sounded as if you were making an educated decision in the video but in reality it would of been dangerous. Fortunately I think your calculations were off a little but regardless you drug a 72,000 lb wrecker backwards & kept pulling? You added more resistance to accomplish the job but kept the same rigging & increased the line load. That's a mistake that you need to understand because it can kill you. You could of easily pulled the steer axle out, broke the chain, ripped the drive axle loose...just to name a few. You have a massive wrecker there so you need to respect the line loads & rigging used. Second...whenever possible recover what is stuck. The left rear axle was buried - that's where you want to concentrate your efforts. A wrap around the tailgate to the right side would of lifted the left side out of the hole...eliminating nearly all of your resistance. Now that could of been done from the same position & pull out 150' of rope...and single line would of been acceptable since I think you would of been pulling around 20-23k. Or just back that single axle in and set up along side of the dump, that was plenty big enough to sit still & do the job. No need to pull the front, it's not stuck. This procedure would of been a lot easier on the casualty as well since you're not putting so much load on the suspension....a lot less of a mess to clean up as well. If you want cool pics, back the Tator in, swing the boom over the tailgate for a vertical lift & use the drag winch for forward motion. It would add visual drama to the pictures & justify all that iron on scene. Just a thought. You were right though...it was a lesson in resistance. Just please be careful out there when dealing with it.
  10. 3 points
    Orcas Tow

    Scooby Doo almost into house.

    I had a call for a Subaru into a house. I arrived on scene to find a Subaru had gone beyond the parking blocks & was resting on the house with the transmission pan on top of a large cinder block. Probably could have used the flatbed but thought it may drag trans pan across cinder block & create a mess, needed lift on both front wheels but that would take 2 wreckers. I'm a small operation on a remote island, so if possible I always try & use what I have on scene. Using my 2001 F550 4x4 with a Chevron 408, twin 9,000 winches with swaged 3/8 wire rope I found a Holmes Tree placed about perfectly on the passenger side of the car for my needs. Using a ladder I choked a 3/8"grade 80- recovery chain/4 ton snatchblock up high on the tree for a high/rearward pull on the passenger side of the Subaru with my drivers side wire rope terminating to a WreckMaster K strap to the passenger front wheel, rigged my passenger side line directly to the Subarus drivers front wheel again terminating with a WreckMaster K strap/4x4 wood block creating clearance for strap to body. Boom up/out high for lift, blocks behind wheels for safety I engaged winches & brought the car back up onto level ground without any further damage to the house or car. Replaced blocks & confirmed no undercarriage damage, happy customer.
  11. 3 points
    Orcas Tow

    Scooby Doo almost into house.

    Thank you for the kind words, as you know most times we are under some kind of push from Law Enforcement, customer, time/safety to clear or simply the next call pending so we get the job done. Every once in a while I get one that is not time sensitive, am able to document & share for the better of the industry as a whole as you can explain techniques all day long but pictures are worth a thousand words.
  12. 3 points
    Njsss

    F450

  13. 3 points
    TowZone

    6000 Member in only 120 Days

    With the exit of AWDirect from the Towing Information Network after more than 14 years as a Tow411 Sponsor. I needed to find another “Major Sponsor” to support our network. While attending the NTEA Work Truck Show last week it just happened a “Well Known Company” offered to add their support and participation as a Platinum Sponsor on the New Force in the Industry. They had only one requirement and that was, we must double our membership within 120 days. At that time we had just reached a goal of more than 3000 members in 15 months. The next goal was set at 6000 members by the end of 2019. To do this in 4 months is nearly impossible as it will take 25 new members each day. This “Well Known Company” set the bar high, but that is nothing for an Industry that in general sets the bar high every day. If your not already a TowForce.net member will you register today and get us closer to this nearly impossible goal. Is it possible, yes however it would take everyone that watches this message board to join. You can join using various methods, there is no cost to join. DAY 1 - 58 New Members - Day 2 - 41 New Members - Day 3 - 20 New Members - Day 4 - 7 New Members - Day 5 - 6 New Members - Day 6 - 7 New Members - Day 7 - 2 New Members - Day 8 - 7 New Members - Day 9 - 7 New Members - DAY 10 - 4 New Members - Day 11 - 11 New Members - Day 12 - 5 New Members - Day 13 - 7 New Members - Day 14 - 10 New Members - Day 15 - 6 New Members - Day 16 - 8 New Members - Day 17 - 5 New Members - Day 18 - 5 New Members - Day 19 - 4 New Members - Day 20 - 7 New Members - Day 21 - 9 New Members - Day 22 - 5 New Members - Day 23 - 0 New Members - Day 24 - 17 New Members - Day 25 - 3 New Members - Day 26 - 2 New Members - Day 27 - 2 New Members - Day 28 - 4 New Members - Day 29 - 16 New Members - Day 30 - 3 New Members - Day 31 - 6 New Members - Day 32 - 13 New Members - Day 33 - 4 New Members - Day 34 - 5 New Members - Day 35 - 6 New Members - Day 36 - 5 New Members - Day 37 - 2 New Members - Day 38 - 5 New Members - Day 39 - 7 New Members - Day 40 - 27 New Members - Day 41 - 4 New Members - Day 42 - 0 New Members - Day 43 - 4 New Members - Day 42 - 1 New Member - Day 43 - 3 New Members - Day 44 - 15 New Members - Day 45 - 1 New Member - Day 46 - 6 New Members - Day 47 - 3 New Members - Day 48 - 4 New Members - Day 49 - 2 New Members - Day 50 - 2 New Members - 410 Current Count 3386 Members Average 8.2 a day - Short 17 Members a day.
  14. 3 points
    EdsTowing

    Pics Say A Thousand Words...

    The Boys were out tonight on the Interstate to bring in a F550 with a Turbo issue. The message board is really worthwhile to keep people moved over if possible.
  15. 3 points
    Hi John ... it's always so very exciting to hear from you across the pond. I hope you and your business are doing well. Thanks for your comments and I personally won't apologize for offending other towers when it comes to ... as you've so eloquently described ... "self-preservation". Perhaps that's one of the reasons why this industry is behind the curve is because we don't want to hurt anyone's feelings. Will towers ever wake up? Highway related fatalities are traced back to 1934 and the same old pig headed mistakes and actions have resulted in literally hundreds of towers killed. And, Like me and you John, I'm pretty sure most towers have their own "struck-by" stories to tell ... some non-preventable. Like the over-use and abuse of amber-light on all the time, perhaps the current feeling is ... "Nah ... it's just another tower killed ... glad it's not me." I guess we've grown numb to the root causes that continue to get tower's killed, but I'm interested in the tower you talked with about no safety vest. At some point John, if you do talk with the company's owner, please share what his reaction were. Best regard. R.
  16. 3 points
    Randall.....that is the most sobering and accurate piece of text I have read in a long time ....you are bang on the money !!! I too in my career have been hit twice, my son Graham had his leg smashed, we had 2 other guys also injured on seperate occasions, both had life changing injuries, Additionally we lost long term employee Terry Booth ......Terry died at the side of a busy road in the middle of the night....witnesses at the inquest testified that his truck was properly positioned with cones out and lit up like a, quote ... "Christmas tree" he had a comprehensive training record with all the regular refreshers ... And STILL it happened !!! The woman driver that hit him was DUI and went to jail ....my point is ...on this occasion all the training he had did not save him .. I whole heartedly agree with your points about self preservation at the roadside ...... Just this morning, on my way to the supermarket , I saw a tow truck at the side of the road half on the kerb and half on the carriageway......apart from the beacons on there was no cones or warning signs displayed the operator had no reflective clothing on, just shorts and tee shirt and worst of all, he was working on the traffic side of the truck ....I stopped and parked my car behind him with the hazard warning lights on....as a bit of warning to other traffic .... I said to the driver, don't you have any hi vis clothing ? Yes he said, I forgot to bring it .. This Tow truck is owned and operated by a very good company and the owner is a long time friend and colleague, he is very pro active with safety and training...he will be furious and dissapointed when I advise him what I saw ...... .your point about macho, testosterone, it wont happen to me ??. Case in point !!! NEVER TAKE THE JOB FOR GRANTED .....NEVER DROP YOUR GUARD . The constant loss of life at the roadside is an absolute tragedy .....but if 1 life can be spared through increased reflectivity, hi visibility clothing, awareness training.... Then it is worthwhile .... Sorry if I have bored or offended any one but , self preservation is the key ...no matter what country or language it is in John.
  17. 3 points
    rreschran

    Tower Down 05.31.19 (CA)

    Right on Brian. But, forget about the costs. Cost shouldn't be a factor in safety and prevention. In all business plans, that should be the first consideration is how to keep a company's employees safe in the work-place. And, that's accomplished by safety, processes and training. We know it ... we see it ... we teach it. But, where is safety lost in translation when tower's can't retain even 10-percent? I'll go out on a limb here to suggest that on-scene safety is the responsibility of each tow company owner. It's each owner's responsibility to make sure towers have the, "mental tools and preparations", before sending their personnel onto the highway. I personally feel the industry has lost it's sense of safety by making bling and monster-tow trucks the priority while safety and survival scrapes the bottom of the proverbial barrel. I evidenced that recently by noting seven, only seven attendees, including you Brian, attend a PTSD seminar versus that of seeing literally hundreds of towers watching a rotator being run through its paces at the same tow show. It's evidenced in these posts where only a handful of personalities have the guts to approach those procedures and processes that get tower's killed. When an industry doesn't care about it's people, its current state will only get worse before it ever gets better. We know the issues, so, what's it take to overcome the lack of safety awareness in a proactive manner? One can't expect to peer down the barrel of a gun with the possibility of being shot in the face right?
  18. 3 points
    We had to rescue this lady the other day who decided a soaking wet farm field was the best place to turn around. Not 500 feet further down the road is an intersection with a nice hard packed dirt spot to turn around, but I guess she couldn't wait that long. Nice easy pull back to solid ground.
  19. 3 points
    EdsTowing

    Rollover With Clean Up

    Explorer lost control in the rain on a sharp "S" curve & rolled into the woods.... Lots of glass & debris to clean up... Now the fun starts...Property Damage Liability Claim....
  20. 3 points
    EdsTowing

    Early morning Roll....

    Eddie grabbed this one this morning.... Wrapped up in a few minutes...then a beauty shot...LoL
  21. 3 points
    EdsTowing

    Annnnd Another Rollover...

    Jeez 3 rollovers this weekend...all with clean ups too! This one tumble rolled in a private community w/ 25 mph speed limits... She said she swerved because a Goffer ran across the road... They cleaned up the roadway and told the Officer we would be back in the daylight to do a proper clean up.... Destroyed a new Journey...Customer called me to ask if it was driveable? I asked weren't you in it & she said yes....No...No it's not driveable...
  22. 3 points
    As of recent, i think both of us thought the days where over, but here we are. Nothing has been more enjoyable than teaching with this guy, Jeff Martin We at times argue like brothers over class logistics and stuff, but you folks see the end result. Add the other folks and we have a great time. Nobody, I'd rather have by my side. Love ya brother
  23. 3 points
    EdsTowing

    Another Rollover...

    Customer trying to avoid a stopped car & ran off the road. It hit a stone wall & flipped over... A nice "quicky" in & out job...
  24. 3 points
    BigBlonde

    AT ShowPlace Las Vegas Roll Call

    Glenn and myself will be there
  25. 3 points
    ttroseledge

    Progress on 70 Ton Rotator

    There's a lot of red to get rid of, new body and front boxes taking shape, new proportional remote, adding 35k D P 2 speed drag winch and rear 3 stage outriggers. Thanks to TJ ,Jay , and ,Bill Wong UPDATED: More progress shots on 70 ton dewalt, new sides taking shape, unit sanded, braces added to boom base, all new hoses in place, additional valve section installed in valve body, ready to add 35k 2 speed drag winch, new proportional remote ordered.
  26. 3 points
    Randall Resch, Alpine CA. - Operations Editor, American Towman Magazine, retired police officer San Diego Police Department, and Senior Off-Road Recovery Engineer, Naval Special Warfare since 1967. Thanks Ron and Chris for providing the Number one forum that brings towers together.
  27. 3 points
    I'll have to get a pic of it tomorrow George. We took their unit and welded a receiver tube on it. Now we have a pintle hook adapter and a 3 way ball assembly. We also install a factory ford trailer plug in the rear. It makes for a clean install for a 4 wire & 6 wire plugs. She got her new suit on today... I think it looks good....
  28. 3 points
    EdsTowing

    Rollover w/ Plenty Of Rolls....

    Well Ron you're right...no yellow trucks but they were there in spirit! I owe a lot to those people and Big Wheel changed the way I do things literally the day after my 1st class.... nearly 10 years ago. And when I presented my invoice to a typically difficult insurance company, they didn't have a single complaint. My connections made back then have & will continue my business's prosperity for years to come as well as friendships that are priceless. Stuart you're right...I was dreading these rolls as soon as I found out. I knew if I was to drag them out the back and load them on a trailer or carriers, they would be junk for sure. To make matters worse, they have a small hole (7/8") in the middle so rigging to them could be tricky... I knew it would be difficult to lift that dead weight in such a confined area but handling them was potentially dangerous . Like John said, I was concerned that they would move around when the trailer dropped and @ 6000 lbs each...they can make a difference! Wet set it pretty easily, I think I have a video of it...a slight bounce but not much drama. The rolls were damaged some but from their initial movement. They decided to scrap the load in the end so it is what it is. Thanks Randall. We were taxing the Tator pretty good so I decided to add my second line off a block to the drives just in case. It turned up to be a good idea because it was starting to stall the auxiliary winches and the main boom winches were getting the outriggers "Light". A lot of guys really push them but I don't know this truck well enough to exceed the platform. That added line made the difference though to get the initial lift to start & then from there it was like text book. Thanks for all the comments.
  29. 3 points
    goodmichael

    Just a suggestion

    I have a suggestion that I believe could promote a safer work environment for all that read this forum. Would it be possible to start a forum entitled, "Today I made an attempt to be a safer operator by...… This will allow those people who practice safety and proper procedure to share their experience, knowledge, education, and training. One of the suggestions just might prompt someone out there somewhere, to do something different, to put another tool in their mental toolbox, to zig where they normally would have zagged. Who knows, just one person implementing a safe practice or procedure could save someone, somewhere from getting seriously injured, or from someone from having to make that phone call everyone knows that they might have to make, but cringes at the thought of having to make the call.
  30. 3 points
    Here's sad news of a tow operator fatality that occured early this morning making this the first fatality of 2019. According to the news, tow operator, Pat Sisneros, of Madrid Towing, was struck and killed as he attempted to assist a NM state police officer. According to State Police, a semi-truck crashed into a State Police vehicle just before 1 a.m. Police say Pat Sisneros stopped to assist the officer when another semi collided into Sisneros' tow truck, killing him. All lanes on I40 Eastbound MM 157 were closed due to the motor vehicle accident involving the second semi-truck. It was also reported that 20-degree temperatures caused lanes to be were extremely icy. Details are few and an investigation is being on-going. My prayers are with the Sisneros' family and the company Pat worked for. https://www.kob.com/albuquerque-news/albuquerque-roads-slick-and-dangerous/5196197/
  31. 3 points
    While this is not the time for such discussion, it must be discussed before an action plan can be put it place. "My gut feeling is the electronic logging mandate, although artificially, has placed increased pressure on drivers to "push through" because of that set in stone digital clock staring them in the face." I have been hearing this louder and louder that because of the ELD. The dispatchers are pushing the drivers harder. One trucker stated he is one of the few English speaking drivers in the company and he has to routinely tell the person is is speaking with the speak English and to text in English. So, drivers are now be pushed harder. Wasn't that what the CDL and ELD was suppose to stop?
  32. 3 points
    We are entering the apex of the Christmas season this weekend. Colleges are completing final semester exams this week. I have one tomorrow, my last one, thank you God. Many will begin to drink as well as use illegal drugs under the guise of "celebrating." Please be extra cognizant in every step of every process you complete to limit the time you are in harms way. It is not a race, nothing you do is worth risking your life in order to save a few seconds. Your family needs you, your community needs you, and this industry, despite all of it's issues, needs you as well. Each and every one of you is a valuable resource to those close to you. There is no tire, or vehicle for that matter that is worth you risking your health, well being, or life over. that car or tire can be easily replaced, you can not be! I hope every one of you has a blessed, safe, and meaningful Christmas as well as a bountiful 2019. I personally have had a rough 2018, and am ready to close the chapter and look forward to a great 2019.
  33. 3 points
  34. 3 points
    annettemcd

    2018 Motor Club Ranking

    1. Geico --pleasant dispatchers who really seems to care about motorists, fast payment, easy invoice submission, decent rates 2. AAA (NCNU) --When we were part of MountainWestAAA and that was great, now it is Northern California, Nevada, Utah, Arizona, Alaska, Montana, and Wyoming and nothing is the same. 3. Agero --commonly confused about location and destination (a common one has been closed for 6 years), complex procedure for requesting extras, short pays not uncommon, poor communication, commonly lies to us and to motorists about the covered distance. Only 6 jobs so far this year with any other motor club.
  35. 3 points
    A Sneak Peak at the of Monsters that Metro Tow Trucks will have at the American Towman Exposition, this month. Hope to see and meet you there, This should be our Biggest year ever, Thank You all for the support!
  36. 3 points
    Dat1

    Rolls Royce Phantom

  37. 3 points
    Rigged a semi for a reverse roll .... using 1 medium duty wrecker one winch triple rigged to lift and one winch single line to restrain Nick Ovenden preparing to operate the 30 ton / metre knuckleboom crane the latest 3 axle accident unit based on a Mercedes chassis 8 ton payload on the platform note the PPE Preparing the Century Rotator for a spreader bar lift .....
  38. 3 points
  39. 3 points
    EdsTowing

    Three Wheel Action Challenger

    You did a fine job...I have no problems with it. I carry a rubber mat in my 650 for laying under vehicles pulling driveshafts. I also use it on the deck to set pieces like this if needed. I use it all the time when I take the shoes off the wheel lift to use forks. So now if you want some constructive criticism...(and maybe you don't?)...the only problem was dropping it in the customer's driveway. A late model vehicle like that w/ full coverage...I would make every effort to take that to my shop and put it through insurance. That car has maybe 5 grand in damage and it will certainly go through insurance for repairs. Sell the job! Tell them it can go to whatever body shop they like in the morning. Do whatever you can make the decision easy for them. Take them home, get them a rental...whatever you can do. Just add any time to the invoice. I have set up limo or Car service for customers trying to get home to a distant location. You could double the value in that job over taking it home. Just an observance...if it was possible.
  40. 2 points
    Once again a Tow Operator has been struck and killed working along side the very dangerous roadways. I have taken the comments from the Headlines News Story posted earlier in an effort to keep that report devoted to condolences for the loss. We can debate the issue further and yes we should debate this issue while it is fresh. Keep in mind we awaiting further details surrounding this incident. Here is what we have gathered from the initial reports. This was the drivers second day on the job. It was a Friday evening and the incident occurred on southbound 5 Freeway around 8:15 p.m. Questions needing answers and not speculation: At this time of evening was the sun setting? Where was the Tow Operator standing when struck? One report was the tow truck operator was struck another does not reference the truck being struck. Add your questions show they may be researched. Some lines of thought from the Tower Down Topic in the Headlines and Towlines forum. "We as an industry need to stop working in unprotected work zones. Without signage and lane closures we do not have a chance out here. " "The tow truck driver was in the process of towing a broken down vehicle when his truck was struck by the big rig, logs show." "The move over law is just not out there enough, people don't care ." "This section of California’s I-5, towards Gorman and Lebec, is extremely rural, wide, winding and fast traveled." "at 8:30 in the PM, it’s totally pitch-black with no streetlights." "it possible that this operator may have been working/standing near the white-line side when struck by the semi" "I'll suggest that, all the cones, flares, signs, blockers, cops and whatever ... doesn’t negate the fact that working on or near the white-line side is a dangerous place to be." "when there isn’t available assistance in a rural location, it demands that towers be that much more diligent in their actions when working shoulder events." "I am an advocate for OSHA getting belly deep into this industry and mandating that safe operating procedures be initiated." "We are responsible for our own safety. Even then, sometimes we fail. Plan the safest procedures and then abort the plan of it gets too dangerous "
  41. 2 points
    My truck has the steel cab, lighter duty trucks went to aluminum before the 650s did... to answer your question about buying it all over again if I had to it’s a catch 22. At the time I purchased this particular truck because I wanted an extended cab, 26k lbs truck with a cab and a half. I also had a falling out with my local international dealerships service department, after a half butted repair on a 4300, so I told them I swore off international, that left me with freightliner or ford, I opted for the ford because of the warranty primarily, and it was almost 10k dollars less then a comparably equipped FL... the only real drawback I found with my truck is the small cab, at 6’2” my legs get very restless driving after a couple hours, and it gets very cramped with a couple passengers. My bed angle with the air ride dumped is right close to 10 degrees, without the shark tail bed... hope this helps anyone looking!
  42. 2 points
    So many reading and this new system only registers logged in member views. If you're a regular lurker registering has never been easier. Do It Now! Please Doing so will get TowForce closer to a A New Platinum Sponsor that will participate. However, if we cannot reach the 6000 members by June 11th, we prove them right. The Towing & Recovery Industry is just too small of a market for them to expand into. This potential new sponsor wants to get you to their website as they introduce new products. The have also agreed to post in the General Equipment forum with the goal of having a dedicated forum. The traffic is here, we just need to get the numbers up. That means both membership and topic participation. The message board had good traffic even after it broke. However, it became like "Read Only". Do not let this community go in that direction. Thanks, Now Reply to the Roll Call.
  43. 2 points
    Chuckud

    "Hey I forgot to tell you ...."

    Gotta love it when your customer "forgets" those small details, especially when it is that it is a truck and trailer loaded with a small 2.5 ton man lift. Pic was taken after lasso straps removed. Sent from my SM-N920V using Tapatalk
  44. 2 points
    Just because you receive a call does not mean it is safe, and it puts you under no obligation to put the lives of your staff as well as your equipment at risk of harm. I personally have walked away from a Texas Department of Public Safety trooper more than once when they refused to give me a lane to work a scene. My life is worth more than your set of tires and is worth more than any vehicle on the road. You should have policies and procedures in place, and trust the judgment of your staff to make the call in the field. If something is not in a calculated, safe, controlled environment, refuse the call until it is controlled in better favor of your survival. This scene was a failure in judgment, policy, and procedure.
  45. 2 points
    The 2018 Tow Show showcased the very latest products available from the UK and Europe manufacturers.. .. below are just a few shots of a 9 foot wide Faymonville extendable recovery trailer on 5 axles, all steer axles, twin winches, payload Up to 90 tons manufactured in Holland
  46. 2 points
    A selection of medium duty wreckers ^.
  47. 2 points
    TowZone

    Baltimore Tow Show Roll Call 2018

    The show website lists activities associated with the show. There are several events that are outside the show venue. We will do are best to list those events between now and the show. B/A will have shuttles to the factory for the open house as usual. Watch for a info here. Worldwide will have a Meeting and Greet a couple of block from the convention center. Associations generally have at least two gatherings and other companies have meets. We will do are best to list all events that are sponsors, contributors and members are conducting.
  48. 2 points
    "post's picture of iPhone" Looks very efficient!
  49. 2 points
    EdsTowing

    AMG Benz...

    Got a call tonight for a new Mercedes with a flat tire wanting to go to Staten Island NY. We loaded it and told them we would take it down on Monday... A big dollar ride....
  50. 2 points
    Njsss

    No over weight permit needed

This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...